Value Collection 4HB11/2*11/4 Pipe Bushing 1-1/2 X 1-1/4 in

Product Description

The VALUE COLLECTION 4HB11/2*11/4 is a threaded pipe bushing designed to reduce a 1-1/2 inch female port down to a 1-1/4 inch male connection. Constructed from 304 stainless steel, it delivers solid corrosion resistance in wet, chemical-exposed, or outdoor piping environments. The MNPT x FNPT thread configuration allows direct installation into standard NPT fittings without additional adapters. Rated at 150 psi, this bushing suits a range of low- to medium-pressure fluid and gas distribution systems. Plumbers, pipefitters, and mechanical contractors install this type of fitting during new construction and retrofit work where pipe diameter reductions are required at threaded joints.

This bushing is appropriate for residential and light commercial plumbing, process piping, and industrial fluid handling applications where 304 stainless steel is specified for its resistance to rust and general corrosion. It is a practical choice in food service, marine-adjacent, and chemical-handling environments where carbon steel fittings are not suitable. The threaded end connections make installation and removal straightforward in accessible piping runs.

Key Features

• Reduces 1-1/2 inch female NPT port to 1-1/4 inch male NPT connection
• 304 stainless steel construction for corrosion resistance in demanding environments
• MNPT x FNPT threaded ends for direct NPT system compatibility
• 150 psi pressure rating suitable for low- to medium-pressure service
• Compact bushing form factor installs without wrenching on extended pipe sections

Compatibility

Designed as a standard threaded pipe bushing for use in NPT piping systems requiring a 1-1/2 inch to 1-1/4 inch reduction in 304 stainless steel construction.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters in accordance with applicable plumbing codes such as the IPC. Depressurize and drain the line completely before disassembling any threaded fitting. Apply an appropriate thread sealant or PTFE tape to the MNPT threads before making up the joint. Do not over-torque stainless steel threads, as galling can occur and damage both the fitting and the mating component.