Value Collection 475-030 Pvc Pipe Wye 3 in Schedule 40 Slip

Product Description

The VALUE COLLECTION 475-030 is a 3-inch Schedule 40 PVC pipe wye fitting used in drain, waste, and vent (DWV) piping systems. It features slip end connections on all openings, allowing solvent-cement joining to standard Schedule 40 PVC pipe and fittings. The wye configuration creates a 45-degree branch off a main run, directing flow while reducing turbulence compared to tee fittings. Weighing 3.4 pounds, this fitting is suited for residential and light commercial plumbing rough-in work. Licensed plumbers and pipefitters are the typical installers in new construction and remodel applications.

This wye fitting is used in gravity-flow DWV systems where a branch connection must be made to a 3-inch main line. The slip end design accepts standard 3-inch PVC pipe solvent-welded in place. Typical install scenarios include sanitary drain branch connections, vent stack tie-ins, and horizontal drain line transitions in residential and commercial buildings. The Schedule 40 wall thickness provides sufficient strength for above-ground and in-wall DWV service at standard system pressures.

Key Features

• 3-inch fitting size fits standard Schedule 40 PVC pipe and fittings
• Slip end connections on all openings for solvent-cement installation
• Schedule 40 wall thickness rated for residential and commercial DWV service
• PVC construction resists corrosion, chemical attack, and scale buildup
• Wye geometry reduces flow turbulence versus straight tee fittings

Compatibility

Designed as an OEM-style replacement and new-installation fitting compatible with 3-inch Schedule 40 PVC DWV piping systems using solvent-cement slip connections.

Installation Notes

Installation is performed by a licensed plumber following applicable IPC or local plumbing code requirements. Shut off water supply and verify the line is depressurized before cutting into an existing system. Clean and dry all pipe ends before applying primer and solvent cement per the cement manufacturer's instructions. Allow full cure time before pressure-testing or restoring flow.