Value Collection 47153 Style D Single-point Tool Bit Carbide

Product Description

The VALUE COLLECTION 47153 is a neutral-cutting, single-point lathe tool bit in Style D with a pointed nose geometry. It is built for chamfering operations on manual and CNC lathes. The shank measures 1 x 1 inches with a 6-inch overall length, making it compatible with standard toolpost holders that accept 1-inch square shanks. The cutting tip is solid carbide grade K21, which provides the hardness and wear resistance needed for interrupted cuts and abrasive workpiece materials. The 80-degree included angle and 1/32-inch nose radius define the tool profile for precise chamfer generation. Installation is performed by machinists and toolroom technicians.

This tool bit is suited for turning and boring applications in a production or job-shop lathe environment. It is designed for chamfering work on ferrous and non-ferrous materials where the neutral cutting direction minimizes lateral forces. The Style D designation follows industry standard number D-16, allowing direct cross-reference when sourcing a replacement or matching an existing tooling setup. It is a single-piece unit packaged individually, appropriate for toolroom stock or one-off replacement.

Key Features

• Style D pointed nose geometry per industry standard D-16
• Solid carbide grade K21 cutting tip for extended tool life on abrasive materials
• Neutral cutting direction reduces lateral cutting forces
• 80-degree included angle optimized for chamfering applications
• 1/32-inch nose radius for controlled chamfer profile
• 1 x 1 inch shank cross-section fits standard 1-inch square toolpost holders

Compatibility

Designed as an OEM-style replacement or direct toolroom substitute for manual and CNC lathes accepting 1-inch square shank single-point tool bits in Style D configuration.

Installation Notes

This tool bit is installed by machinists or toolroom technicians familiar with lathe toolpost setup. Power down and lock out the lathe spindle before seating or adjusting the tool bit in the holder. Confirm the tool bit is clamped securely and set to the correct center height before beginning any cut. Do not exceed the depth-of-cut or feed rate limits of the lathe or toolholder system.