Value Collection 425-7250 Machine Vise 5 Inch Swivel Base

Product Description

The VALUE COLLECTION 425-7250 is a manual machine vise designed for horizontal workholding operations on mills, drill presses, and machining centers. It features a 5-inch jaw width and a 1-3/8-inch jaw height, providing a solid clamping surface for a range of workpiece sizes. The swivel base allows the vise to rotate for angled setups without repositioning the workpiece. At 59 pounds, this is a substantial, single-station vise built for fixed machine table use. It is installed and operated by machinists and tool and die professionals in job shop and manufacturing environments.

This vise suits horizontal single-station setups on knee mills, bed mills, and drill press tables where manual clamping is required. The swivel base makes it practical for angular milling and drilling operations that require the workpiece to be presented at a specific angle to the spindle. Its overall height of 5.25 inches is a relevant clearance consideration when selecting tooling and spindle travel.

Key Features

• 5-inch jaw width accommodates a broad range of workpiece sizes
• 1-3/8-inch jaw height for consistent workpiece contact and clamping stability
• Swivel base enables angular setups without repositioning on the table
• Horizontal orientation for standard machine table mounting
• Manual operation with single-station clamping
• Overall height of 5.25 inches supports tooling clearance planning

Compatibility

Designed as a general-purpose horizontal machine vise for use on mill tables and drill press tables where T-slot or direct mounting is available. Confirm table slot spacing and bolt pattern before installation.

Installation Notes

Machine vises of this type are installed by machinists using T-bolts and strap clamps matched to the machine table slot pattern. Power down and lock out the machine before mounting or removing the vise. Verify that the vise is trammed parallel to the machine axis using a dial indicator before tightening final mounting fasteners. Do not exceed the rated clamping force of the vise screw assembly.