Value Collection 42176 M16 X 2 X 80mm Hex Cap Screw

Product Description

The Value Collection 42176 is a metric hex head cap screw designed for general mechanical fastening applications requiring strength and corrosion resistance. Built to Grade 8.8 steel with a zinc-plated finish, this fastener meets DIN 931 and ISO 4014 standards for partially threaded hex cap screws. The M16 x 2.00 thread with an 80 mm length under head makes it well-suited for medium-to-heavy structural and machine assembly work. A 24 mm hex drive allows installation with standard metric wrenches or sockets. Machinists, millwrights, maintenance technicians, and industrial assemblers commonly use this screw in equipment fabrication, structural bracketing, and general bolted joint assembly.

This screw is intended for metric fastening applications where a partially threaded shank is required to bear load along the unthreaded grip length. It is commonly used in steel fabrication, machinery assembly, and maintenance repairs where Grade 8.8 mechanical properties are specified. The zinc-plated finish provides moderate corrosion protection suitable for indoor and controlled-environment applications. Packaged in quantities of 10, it is appropriate for both bench-stock use and single-job sourcing.

Key Features

• Grade 8.8 steel construction provides a minimum tensile strength suitable for structural bolted joints
• Partially threaded shank per DIN 931 and ISO 4014 standards for proper load-bearing grip length
• Zinc-plated finish for moderate corrosion resistance in dry or low-moisture environments
• M16 x 2.00 metric thread with 80 mm length under head for medium-to-heavy fastening applications
• 24 mm hex drive compatible with standard metric wrenches and sockets
• Packaged in a quantity of 10 to support both stocking and project-specific use

Compatibility

Designed as a standard metric hex head cap screw conforming to DIN 931 and ISO 4014 specifications, suitable for use wherever an M16 x 2.00 partially threaded cap screw is called out in metric fastener applications.

Installation Notes

Installation should be performed by qualified mechanical or maintenance technicians familiar with metric fastener specifications and torque requirements. Always verify mating thread condition and ensure proper thread engagement before applying final torque. Use a calibrated torque wrench sized for a 24 mm hex drive and follow the applicable engineering specification or fastener grade torque table for Grade 8.8 hardware. Inspect mating surfaces for burrs or contamination that could affect clamp load before assembly.