Value Collection 406-060 Pvc 90 Elbow 6 in Sch 40 Slip

Product Description

The VALUE COLLECTION 406-060 is a 6-inch Schedule 40 PVC 90-degree elbow designed for use in non-pressurized and pressure-rated drain, waste, vent, and water distribution piping systems. Featuring slip-by-slip socket connections on both ends, this fitting accepts solvent-cement bonding for a leak-resistant joint. Weighing 8 pounds, it is built to the dimensional standards expected of Schedule 40 fittings and is suitable for both above-ground and below-ground installations where PVC piping is code-approved. Licensed plumbers and pipefitters are the primary installers of this component.

This elbow is used in residential and commercial plumbing applications where a 90-degree directional change is required in a 6-inch PVC pipeline. Typical install scenarios include sewer laterals, stormwater drainage systems, irrigation mains, and industrial process piping where PVC is specified. The slip-by-slip configuration means both ends receive a plain-end pipe or fitting hub bonded with PVC solvent cement.

Key Features

• 6-inch fitting size accommodates standard Schedule 40 PVC pipe of the same nominal diameter
• 90-degree sweep redirects flow at a right angle within the pipeline
• Slip x Slip end connections accept solvent-cement bonding on both ends
• Schedule 40 wall thickness meets standard pressure and dimensional ratings for PVC fittings
• PVC construction offers corrosion resistance in drainage, irrigation, and low-pressure water service applications

Compatibility

Designed as an OEM-style replacement or new-installation fitting compatible with 6-inch nominal Schedule 40 PVC pipe and fittings using slip socket connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and ASTM standards for PVC solvent-cemented joints. Shut off and depressurize the water supply or isolate the drain line before cutting into existing piping. Clean and dry all mating surfaces, apply primer where required by code, and use PVC solvent cement rated for the pipe schedule and service type. Allow full cure time before restoring pressure or flow.