Value Collection 3SSBSMO4x10 Button Socket Cap Screw M4x0.7

Product Description

The VALUE COLLECTION 3SSBSMO4x10 is a fully threaded M4x0.7 button socket cap screw manufactured from A2 (18-8) stainless steel with a bright, uncoated finish. Conforming to ANSI/ASME B18.3.4M and ISO 7380, this fastener features a low-profile button head and a 2.50 mm hex socket drive. The 10 mm length under the head makes it well suited for shallow clearance applications where a standard hex cap head would protrude too far. Mechanical, maintenance, and assembly technicians working with metric hardware will find this screw appropriate for light to medium clamping loads. The stainless steel construction provides corrosion resistance without a secondary coating.

Button socket cap screws in the M4x0.7 size are commonly used in panel assembly, equipment enclosures, instrumentation brackets, and general-purpose machine fastening where a flush or near-flush head profile is required. The ISO 7380 standard governs the dimensional and mechanical requirements for this screw type, making it interchangeable with other conforming metric fasteners in the same size. This screw is appropriate for both indoor and outdoor assemblies where mild to moderate corrosion resistance is needed. It is sold in minimum order quantities of 100 pieces.

Key Features

• M4x0.7 metric thread with right-hand direction and 6G thread fit class for consistent engagement
• Low-profile button head per ISO 7380 reduces protrusion in clearance-critical assemblies
• 2.50 mm hex socket drive accepts standard metric Allen keys and hex bit drivers
• A2 (18-8) stainless steel construction provides corrosion resistance without plating or coating
• Fully threaded along the 10 mm length under head for maximum thread engagement in thin materials
• Meets ANSI/ASME B18.3.4M and ISO 7380 fastener standards

Compatibility

Designed as a standard metric replacement or stock fastener for any application requiring an ISO 7380 M4x0.7 button socket cap screw with a 10 mm length under the head.

Installation Notes

Install using a 2.50 mm hex key or hex socket bit; avoid undersized drivers to prevent rounding the socket. Torque to the assembly specification appropriate for A2 stainless M4 fasteners per the applicable engineering or maintenance documentation. De-energize and isolate any equipment before accessing fastened panels or enclosures. When installing stainless fasteners into stainless threaded holes, apply an anti-seize compound to reduce the risk of galling.