Value Collection 351-0615 Cylinder Mounted Point Fine Ceramic

Product Description

The VALUE COLLECTION 351-0615 is a cylinder-shaped ceramic mounted point designed for fine grinding, deburring, and surface finishing on hard materials. It features a rubberized ceramic abrasive construction rated at a hard hardness grade with 220 grit, making it well suited for controlled material removal and edge cleanup. The 3/32-inch shank fits standard die grinders and rotary tools, and the point is rated to 30000 RPM for use at high speeds. Licensed tradespeople and shop machinists alike reach for mounted points like this when precision finishing in tight areas is required.

This mounted point is used in metal fabrication, tool and die work, mold finishing, and general shop maintenance where a cylindrical abrasive profile provides consistent contact on flat, curved, or recessed surfaces. The 10mm maximum diameter and 20mm overall length make it a compact option for internal bore work, slot cleaning, and weld seam dressing. It is appropriate for use in both production and maintenance settings where a fine-grade abrasive is needed without transitioning to a bonded wheel or flap disc.

Key Features

• Cylinder point shape for consistent contact on flat and contoured surfaces
• Ceramic abrasive material with 220 grit fine grade for controlled finishing
• Hard hardness rating provides durability and longer service life under pressure
• Rated to 30000 RPM for compatibility with high-speed die grinders and rotary tools
• 3/32-inch shank diameter fits standard collets on most rotary and die grinder tools
• Compact 10mm x 20mm profile suited for confined work areas and internal surfaces

Compatibility

Designed as a standard mounted point for use with die grinders and rotary tools accepting a 3/32-inch shank collet.

Installation Notes

Mounted points should be installed by securing the shank fully into the collet of the die grinder or rotary tool before tightening. Verify the tool's maximum RPM rating meets or exceeds 30000 RPM before operation. Always inspect the point for cracks or chips before mounting, and never exceed the rated RPM. Appropriate eye protection and work gloves should be worn during use in accordance with shop safety standards.