Value Collection -34117-1 Open End Blind Rivet Size 45

Product Description

The VALUE COLLECTION -34117-1 is a Size 45 open end blind rivet with a dome head, steel body, and steel mandrel. Sold in a pack of 100, this rivet is designed for blind-side fastening applications where access to the back of the workpiece is limited. The body diameter measures 0.125 inches and accepts a hole diameter range of 0.129 to 0.133 inches. Grip range spans 0.251 to 0.312 inches, making it suited to thin-stack assemblies. The mandrel carries a phosphate finish. Tensile strength is rated at 310 pounds and shear strength at 260 pounds. Licensed fabricators, sheet metal workers, and maintenance technicians are the typical installers.

This rivet is used in light-gauge sheet metal assembly, HVAC ductwork, enclosure fabrication, and general maintenance and repair. The dome head profile provides a low-profile finished appearance on the visible face. With a length under head of 0.462 inches and a head height of 0.040 inches, the rivet fits standard pull-type rivet tool mandrel chucks. The pack quantity of 100 units suits job-site use and shop stocking.

Key Features

• Open end blind rivet design for single-side installation
• Steel body and steel mandrel rated to IFI 114 Grade 30 standard
• Tensile strength: 310 pounds; shear strength: 260 pounds
• Grip range: 0.251 to 0.312 inches for use in thin-stack assemblies
• Phosphate finish on mandrel for corrosion resistance
• Dome head profile with 0.250-inch head diameter and 0.040-inch head height
• Pack of 100 units per order

Compatibility

Designed for use in standard pull-type blind rivet tools accepting a drill Size 30 wire gauge hole (0.129 to 0.133 inches) and compatible with assemblies requiring a 0.125-inch body diameter rivet per IFI 114 Grade 30 specification.

Installation Notes

Drill the mating hole to the specified diameter range of 0.129 to 0.133 inches before installation. Use a standard pull-type hand or pneumatic rivet tool sized for a 0.125-inch body rivet. Confirm that the material stack falls within the 0.251 to 0.312-inch grip range before pulling the mandrel. Discard spent mandrel stems in a proper waste receptacle and inspect the set rivet head for full seating before moving to the next fastener.