Value Collection 33053 Cobalt Roughing T-slot Cutter

Product Description

The VALUE COLLECTION 33053 is a cobalt roughing T-slot cutter designed for milling T-slots in machine tool tables, fixtures, and workholding components. Built from M42 cobalt high-speed steel, this cutter handles interrupted cuts and harder materials better than standard HSS tooling. It measures 1-27/32 inches in diameter with a 53/64 inch cutting width and mounts on a 1-1/4 inch diameter shank. The 6-tooth straight configuration is optimized for roughing passes, removing material efficiently before finishing. Machinists and tool-and-die technicians use this cutter in manual knee mills and CNC machining centers where T-slot profiles are required.

This T-slot cutter is suited for job shops, maintenance departments, and production environments that need to cut or clean T-slots in cast iron, steel, and alloy workpieces. It fits setups requiring a 1 inch bolt size T-slot profile. The 3-63/64 inch shank length provides adequate reach for deep table slots, and the 1-1/32 inch neck diameter clears the slot walls during the cut. The uncoated bright finish makes the tool condition easy to inspect between passes.

Key Features

• M42 cobalt HSS construction for improved heat and wear resistance over standard HSS cutters
• 6-tooth straight tooth configuration optimized for roughing T-slot cuts
• 1-27/32 inch cutter diameter with 53/64 inch cutting width matches 1 inch bolt size T-slot profile
• 1-1/4 inch shank diameter compatible with standard milling machine arbors and collet systems
• 3-63/64 inch shank length with 1-1/32 inch neck diameter for adequate slot clearance
• Bright uncoated finish allows easy visual inspection of tool wear

Compatibility

Designed for use in manual knee mills and CNC machining centers with standard 1-1/4 inch arbor or collet toolholding systems. Intended for cutting 1 inch bolt size T-slots in steel, cast iron, and alloy materials.

Installation Notes

This cutter should be installed by a qualified machinist familiar with milling arbor setups and T-slot cutting procedures. Ensure the spindle is fully stopped and the machine is locked out before mounting or removing the cutter. Secure the shank firmly in a properly sized arbor or collet and verify runout before engaging the workpiece. Use appropriate cutting fluid and conservative feed rates on the roughing pass to avoid overloading the teeth.