Value Collection 3015000C1MS-P1 Heat Shrink Sleeve

Product Description

The VALUE COLLECTION 3015000C1MS-P1 is a clear PVC heat shrink sleeve designed for wire protection and insulation in electrical installations. With a 2:1 shrink ratio, it starts at a 1-1/2 inch inner diameter and shrinks down to 3/4 inch ID when heat is applied at 212 degrees F. The sleeve measures 6 inches in overall length and delivers a wall thickness of 0.043 inches after shrinking. Electricians and wire harness technicians use this tubing to seal, protect, and bundle conductors in both commercial and residential wiring applications. The clear color allows visual inspection of the underlying wire or termination without removing the sleeve.

This heat shrink sleeve fits into the wire management and wire protection category, making it appropriate for conduit terminations, splices, connector backshells, and exposed conductor ends. It is sold in packages of 5 pieces per package. The sleeve is well-suited for panel wiring, junction box terminations, and field repairs where a clean, durable insulation layer is needed. Its operating temperature range of -4 degrees F to 221 degrees F covers the majority of indoor and outdoor electrical service environments encountered in trade work.

Key Features

• 2:1 shrink ratio - starts at 1-1/2 inches ID, recovers to 3/4 inch ID
• Clear PVC construction allows visual inspection after installation
• Shrink temperature of 212 degrees F, compatible with standard heat guns
• Resistant to acid, flame, fungus, oil, splitting, sunlight, and UV exposure
• Operating range from -4 degrees F to 221 degrees F
• Meets ASTM D3150, CSA OFT, RoHS, SAE-AMS-DTL-23053/2 Class 2, and UL 224 VW-1 standards

Compatibility

Designed as an OEM-style replacement and general-use heat shrink sleeve for wire protection applications in residential and commercial electrical installations requiring a 1-1/2 inch pre-shrink inner diameter and 6 inch length.

Installation Notes

Installation is performed by licensed electricians or qualified wire technicians following NEC guidelines. De-energize all circuits completely before applying heat shrink tubing to any conductor or termination. Use a calibrated heat gun to apply even heat around the sleeve until full recovery is achieved - avoid open flame, which can cause uneven shrink or damage the tubing. Inspect the recovered sleeve for complete contact and no lifting at the edges before returning the circuit to service.