Value Collection 240224 Chucking Reamer 3/4 in 2MT

Product Description

The VALUE COLLECTION 240224 is a carbide-tipped chucking reamer designed to finish-ream drilled or bored holes to precise tolerances in metalworking applications. The reamer measures 0.750 inches in diameter with a 9.5 inches overall length and a 2.5 inches flute length. Six straight flutes in a right-hand cutting direction remove material evenly and produce a smooth bore finish. The 2MT (Morse Taper 2) shank seats directly into compatible drill press or lathe spindles. The bright, uncoated carbide-tipped cutting edges hold up under repeated use in production and job-shop environments. Machinists and tool-and-die technicians are the primary installers of this type of reamer.

This chucking reamer is suited for finishing holes in ferrous and non-ferrous metals where dimensional accuracy is required. It is commonly used in drill press, lathe, or milling machine setups where the spindle accepts a 2MT taper shank directly or through a suitable adapter. The Series 2402 designation identifies the product line within the VALUE COLLECTION catalog. The reamer holds a diameter tolerance of +0.0003 to -0.0000 inches, making it appropriate for close-tolerance fit applications in general machining, maintenance, and repair operations.

Key Features

• Carbide-tipped cutting edges for extended tool life in production use
• Six straight flutes with right-hand cutting direction for consistent material removal
• 2MT Morse Taper shank for direct mounting in compatible spindles
• Diameter tolerance of +0.0003 to -0.0000 inches for close-tolerance bore finishing
• Bright, uncoated finish - no coating to interfere with dimensional accuracy
• No coolant-through feature; suitable for conventional flood or manual coolant application

Compatibility

Designed for use in drill presses, lathes, and milling machines equipped with a Morse Taper 2 spindle or adapter. Fits standard 2MT toolholding systems used across general machining setups.

Installation Notes

Installation is performed by qualified machinists familiar with taper-shank tooling. Before mounting, clean the 2MT taper shank and spindle socket thoroughly to remove chips, oil, and debris - any contamination will affect runout and finished hole accuracy. Secure the taper firmly by seating it with a draw bar or tang where the machine spindle requires it. Never force a reamer through an undersized pilot hole; always pre-drill or bore the hole to the recommended pre-ream diameter before use.