Value Collection 219-5016 End Mill Holder 5MT Taper Shank

Product Description

The VALUE COLLECTION 219-5016 is a Morse taper end mill holder designed for use with milling machines and machining centers equipped with a 5MT taper spindle. It accepts a 1/2 inch tool shank and provides a projection of 1.791 inches, positioning the cutting tool at a fixed distance from the spindle face for consistent setup. The holder does not include through-coolant capability. Weighing 3.78 pounds, it is built for rigid, direct-drive tool holding in metal-removal operations. This type of holder is installed by machinists and tool room technicians working with manual or CNC milling equipment.

This end mill holder is suited for shop environments where a 5MT taper spindle is standard, including manual knee mills, vertical milling machines, and compatible machining centers. The 1/2 inch bore accepts standard end mills and cutting tools of that shank diameter. The 1.791 inch projection suits applications where moderate tool stick-out is acceptable and direct, secure clamping is preferred over collet-style systems. No through-coolant port is present, so flood or mist coolant must be applied externally at the cutting zone.

Key Features

• 5MT Morse taper shank for direct spindle mounting
• 1/2 inch bore accommodates standard end mill shank diameter
• 1.791 inch (45.50 mm) projection for consistent tool positioning
• No through-coolant passage — external coolant application required
• Solid, rigid holder construction suited for metal-removal milling operations

Compatibility

Designed as an OEM-style end mill holder for milling machines and machining centers with a 5MT Morse taper spindle bore and requiring a 1/2 inch tool shank interface.

Installation Notes

Installation and removal should be performed by a qualified machinist with the machine powered down and the spindle fully stopped. A drawbar or drift may be required to seat or release the taper depending on the machine design. Confirm taper seating and shank clamp torque per the machine manufacturer specifications before operation. Inspect the taper bore and holder shank for burrs or debris before mounting to ensure full contact and runout accuracy.