Value Collection 16768 Cpvc End Cap 3/4 Inch Slip

Product Description

The VALUE COLLECTION 16768 is a 3/4-inch CPVC end cap designed to terminate and seal the open end of a CPVC pipe run. Fabricated from chlorinated polyvinyl chloride (CPVC), this fitting accepts a slip connection, meaning the pipe end is solvent-welded directly into the socket of the cap. End caps of this type are standard components in hot and cold water distribution systems where a pipe branch or run must be permanently closed off. Plumbers and pipefitters install this cap wherever a piped section needs to be capped, pressure-tested, or permanently terminated.

This end cap is suited for residential and light commercial plumbing applications that use 3/4-inch CPVC piping. Common installation scenarios include domestic hot and cold water supply lines, hydronic heating systems plumbed in CPVC, and any situation where an open pipe end must be closed prior to system pressurization or inspection. The slip connection design requires solvent cement compatible with CPVC material for a leak-free, permanent bond.

Key Features

• 3/4-inch fitting size matches standard CPVC pipe dimensions
• Slip end connection accepts solvent-cement bonding for a permanent, pressure-rated seal
• CPVC construction offers elevated temperature and chemical resistance compared to standard PVC
• Compact, low-profile cap geometry suitable for tight spaces and finished wall rough-ins
• Lightweight at 0.01 pounds, minimizing added load on pipe runs

Compatibility

Designed as an OEM-style replacement fitting for 3/4-inch CPVC plumbing systems using slip-connect solvent-weld joints.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and local jurisdiction requirements. Shut off and depressurize the water supply completely before cutting into any existing pipe run. Use only CPVC-rated solvent cement and primer; do not substitute PVC cement, as it is not rated for CPVC material. Allow full cure time per the cement manufacturer instructions before pressurizing the system.