Value Collection 112291 Mounted Flap Wheel 320 Grit

Product Description

The VALUE COLLECTION 112291 is a mounted flap wheel abrasive designed for deburring, blending, and finishing operations on metal and other hard surfaces. It features an aluminum oxide coated abrasive on a cloth backing rated at X-weight, delivering consistent cut and finish in tight or contoured areas. The 1/8 inch shank mounts directly into a die grinder or rotary tool, and the wheel is rated to 30,000 RPM for high-speed work. At 320 grit, this wheel falls in the extra fine grade range, making it well suited for final surface prep and light stock removal. Machinists, toolroom technicians, and fabricators are the primary users.

This flap wheel is used in precision metalworking, tool and die, aerospace component finishing, and general fabrication shops. Its compact 1-3/16 inch diameter and 3/16 inch face width allow it to reach into small bores, channels, and recessed geometry where larger wheels cannot. It is commonly used on handheld die grinders in bench and floor operations where fine surface finish is required before inspection or coating.

Key Features

• 320 grit aluminum oxide coated abrasive for extra fine finishing
• Cloth backing at X-weight provides flexibility across contoured surfaces
• 1/8 inch shank for direct mounting in standard die grinders and rotary tools
• 30,000 RPM maximum speed rating supports high-speed spindle use
• Compact 1-3/16 inch diameter and 3/16 inch face width for access to tight geometry
• No interleaf construction for consistent abrasive contact throughout wheel life

Compatibility

Designed as an OEM-style replacement or direct-use mounted flap wheel for standard 1/8 inch collet die grinders and rotary tools used in metalworking and finishing applications.

Installation Notes

Installation is performed by a machinist or toolroom technician using a die grinder with a 1/8 inch collet. Verify the spindle RPM rating does not exceed the 30,000 RPM maximum before mounting. Inspect the wheel for damage before each use and do not use a wheel that shows fraying, cracking, or loose flaps. Always wear appropriate eye and face protection per applicable ANSI safety standards when operating mounted abrasives.