Value Collection 112069 Mounted Flap Wheel 180 Grit

Product Description

The VALUE COLLECTION 112069 is a mounted flap wheel designed for precision deburring, blending, and surface finishing on metal, wood, and composite materials. It features an aluminum oxide coated abrasive on a cloth backing, rated at a very fine 180 grit for smooth, controlled stock removal. The 3/4 inch outer diameter and 3/16 inch face width make it well suited for detail work in tight areas, slots, and contoured surfaces. With a 1/8 inch shank, it mounts directly to a die grinder, rotary tool, or drill press and is rated to a maximum of 35,000 RPM. This type of wheel is typically installed and used by machinists, tool-and-die techs, fabricators, and maintenance technicians.

This mounted flap wheel is intended for small-scale finishing operations where a standard grinding wheel or larger abrasive would be too aggressive or too large to access the work surface. It performs well on internal bore surfaces, weld seams in confined spaces, and irregular contours that require consistent finish quality. The very fine grade makes it appropriate for final-pass finishing rather than aggressive material removal, delivering a refined surface without heavy scratching.

Key Features

• 180 grit aluminum oxide coated abrasive for very fine surface finishing
• 3/4 inch outer diameter fits tight spaces and contoured work surfaces
• 3/16 inch face width provides a narrow contact area for detail work
• 1/8 inch shank mounts to standard die grinders and rotary tools
• 35,000 RPM maximum rating suits high-speed rotary tool applications
• Cloth backing with X-weight construction for durability under load

Compatibility

Designed as a direct-mount abrasive accessory for die grinders, rotary tools, and drill press setups accepting a 1/8 inch shank.

Installation Notes

Verify that the spindle speed of the tool does not exceed the 35,000 RPM maximum rating of this wheel before use. Ensure the shank is fully seated and the collet is properly tightened before operating the tool. Wear appropriate eye protection and work gloves when using abrasive accessories. Inspect the wheel for damage or delamination before each use and replace it if any defects are found.