Value Collection 105-613NL Brass Stop Waste Valve 1/2 in

Product Description

The VALUE COLLECTION 105-613NL is a brass stop and waste valve designed for shutoff and drainage in residential and light commercial plumbing systems. Rated at 125 psi WOG (water, oil, gas), this valve handles water, oil, and air service. The lobe-type handle provides a positive grip for manual operation. Compression end connections allow installation without soldering, making it practical for copper tubing work in tight spaces. At 0.65 pounds and a compact footprint, this valve fits standard rough-in applications where a reliable in-line shutoff with a waste port is required.

Stop and waste valves are used in irrigation supply lines, outdoor hose bib risers, and branch supply lines where the installer needs both a shutoff and a means to drain the line downstream. The 1/2 inch pipe size suits the majority of residential branch supply runs. The compression end connections make this valve a common choice for retrofit and repair work on copper or compatible tubing systems without a torch. Licensed plumbers and experienced service techs are the primary installers of this valve type.

Key Features

• 125 psi WOG pressure rating suitable for water, oil, and air service
• Brass body construction for corrosion resistance in wet plumbing environments
• Lobe-type handle delivers firm grip and clear open/closed indication
• Compression end connections allow torch-free installation on copper tubing
• Integrated waste port enables downstream line drainage after shutoff
• Compact dimensions at 3.13 inches length and 0.65 pounds for tight-space installs

Compatibility

Designed as an OEM-style replacement or new-installation stop and waste valve for 1/2 inch pipe systems handling water, oil, or air at pressures up to 125 psi WOG.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Shut off the main water supply and relieve line pressure completely before cutting into the existing line. Compression fittings must be seated squarely and tightened to the manufacturer specification without over-tightening, which can crack the ferrule. Verify flow direction and waste port orientation before final tightening, as repositioning after compression set can compromise the seal.