Value Collection 10105600 Galvanized Round Pipe 5 in

Product Description

The VALUE COLLECTION 10105600 is a galvanized steel round pipe designed for use in forced-air duct systems, exhaust runs, and general HVAC air-distribution applications. Measuring 5 inches in inside diameter and 60 inches in overall length, this standard-gauge pipe provides a rigid, corrosion-resistant conduit for conditioned or exhaust airflow. The galvanized finish protects against rust in typical indoor and semi-exposed installations. At 3.78 pounds, the pipe is manageable for single-person handling during rough-in or retrofit work. Licensed HVAC technicians and sheet metal installers are the primary trades that specify and install this product.

This round pipe suits residential and light-commercial forced-air HVAC ductwork, make-up air systems, kitchen exhaust rough-ins, and general ventilation layouts where a 5-inch round section is required. It is commonly used as a trunk-line branch takeoff, a straight run between fittings, or an inline section connecting an air handler to downstream diffusers. The 60-inch length reduces the number of joints needed in longer runs, which helps minimize leakage points in the duct system.

Key Features

• 5-inch inside diameter sized for standard round duct fittings and takeoff collars
• 60-inch overall length reduces field cuts and connection points per run
• Galvanized steel construction resists corrosion in typical HVAC environments
• Standard gauge wall thickness suitable for residential and light-commercial air distribution
• Lightweight at 3.78 pounds for easy single-person handling and positioning

Compatibility

Designed as a standard round duct section compatible with 5-inch round HVAC fittings, elbows, collars, and takeoffs used in residential and light-commercial forced-air duct systems.

Installation Notes

Installation should be performed by a licensed HVAC technician or qualified sheet metal installer in accordance with SMACNA duct construction standards and applicable local mechanical codes. Secure all joints with sheet metal screws and seal with UL 181-listed duct mastic or foil tape rated for the application before insulating. Support horizontal runs at intervals required by local code, typically no greater than 10 feet, to prevent sagging and maintain system static pressure. Shut down and lock out the air handler before cutting into or connecting to an existing duct system.