Value Collection 101-007NL Brass Swing Check Valve 1-1/2 in

Product Description

The VALUE COLLECTION 101-007NL is a brass swing check valve designed to allow one-directional flow and prevent backflow in piping systems. The valve features a swing-style disc mechanism and IPS (Iron Pipe Size) end connections for straightforward installation into standard threaded pipe lines. Rated at 200 WOG (Water, Oil, Gas), it is suitable for a range of fluid handling applications. The body and seal are both constructed from brass alloy material grade 46400, providing corrosion resistance in wet service environments. This valve is installed by licensed plumbers and pipefitters in residential and light commercial piping systems.

This swing check valve is sized for 1-1/2 inch pipe and is commonly used in water supply, recirculation, and general fluid distribution lines where preventing reverse flow is required. IPS threading makes it compatible with standard iron pipe size fittings found in residential plumbing and light commercial mechanical rooms. The 200 WOG pressure rating covers most typical low-to-medium pressure service conditions encountered in these installations.

Key Features

• Swing-style check mechanism prevents backflow without requiring external actuation
• 200 WOG pressure rating suitable for water, oil, and gas service
• Brass body and brass seal construction, material grade 46400, for corrosion resistance
• IPS end connections thread directly onto standard iron pipe size fittings
• Compact body at 2.75 inches height and 1.75 inches width for tight installation spaces

Compatibility

Designed as an OEM-style replacement or new-install swing check valve for 1-1/2 inch IPS threaded piping systems rated for water, oil, or gas service up to 200 WOG.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off supply pressure and relieve line pressure completely before removing any existing valve or making new connections. Apply appropriate thread sealant or PTFE tape to IPS threads before assembly and tighten to hand-tight plus the manufacturer-recommended turns for threaded brass fittings. Verify flow direction arrow on the valve body is aligned with the intended flow direction before final tightening.