Value Collection 07334 Concrete Wedge Anchor 5/8 in Hex Head 5-pack

Product Description

The VALUE COLLECTION 07334 is a stainless steel concrete wedge anchor designed for secure fastening into poured concrete and masonry substrates. Measuring 5/8 inches in diameter and 6 inches in overall length, it features a 4-1/2 inch thread length and requires a minimum embedment depth of 2-3/4 inches. The hex head drive allows for installation with standard wrenches or impact tools. Constructed from 304 stainless steel, this anchor resists corrosion in wet, outdoor, and chemically exposed environments. It is sold in a pack of 5 and suits structural and mechanical anchoring tasks where long-term holding strength and corrosion resistance are required.

Concrete wedge anchors of this size are commonly used in commercial and industrial construction, mechanical equipment mounting, structural steel connections, and utility installations. Typical applications include anchoring base plates, equipment pads, pipe hangers, conduit supports, and similar trade fixtures to concrete floors, walls, and foundations. The 5/8 inch diameter is a standard size for medium-to-heavy load anchoring tasks performed by licensed contractors across construction, HVAC, plumbing, and electrical trades.

Key Features

• 5/8 inch diameter with 6 inch overall length for deep concrete engagement
• 304 stainless steel construction for corrosion resistance in wet and outdoor environments
• 4-1/2 inch thread length provides extended engagement range for varying fixture thicknesses
• 2-3/4 inch minimum embedment depth for reliable pull-out and shear load resistance
• Hex head drive is compatible with standard wrenches and power impact tools
• Pack of 5 anchors per package to support multi-point fastening tasks

Compatibility

Designed as a standard 5/8 inch wedge anchor for use in solid concrete and hard masonry applications. Verify base material suitability and required embedment depth against project load specifications before installation.

Installation Notes

Installation is typically performed by licensed contractors using a hammer drill with a carbide-tipped bit sized to match the anchor diameter. Drill the hole to the required depth, clear debris with compressed air or a brush, insert the anchor through the fixture, and torque the nut until the wedge expands and seats firmly against the hole wall. Always follow applicable building codes and anchor manufacturer load tables for minimum edge distance, spacing, and embedment requirements. Do not install in cracked, spalled, or deteriorated concrete without engineering review.