Value Collection 06811533 Compression Spring 0.42in Od

Product Description

The VALUE COLLECTION 06811533 is a small-diameter compression spring suited for light-duty mechanical assemblies and industrial applications. With a 0.42-inch outside diameter and a 1.5-inch free length, this spring operates under modest loads, delivering a maximum work load of 2.67 pounds and a spring rate of 2.31 pounds per inch. Wire diameter is 0.028 inches. The compact solid height of 0.233 inches makes it well-suited for confined spring pockets. Mechanical technicians, maintenance professionals, and production assembly teams typically source this spring as an OEM replacement or build component in precision mechanisms.

This compression spring fits applications where a small OD and light spring force are required. The 0.438-inch hole diameter clearance spec guides bore sizing during installation. Typical use cases include light-duty actuators, valve return mechanisms, latches, and general industrial hardware. The spring is sold in a package quantity of ten units, making it practical for bench stock, kitting, and low-volume production runs.

Key Features

• 0.42-inch outside diameter with 0.438-inch recommended hole diameter for proper bore fit
• 1.5-inch free length with a compressed solid height of 0.233 inches
• Spring rate of 2.31 pounds per inch for predictable, linear load response
• Maximum work load of 2.67 pounds suitable for light-duty return and actuation applications
• 0.028-inch wire diameter for fine-pitch coil construction
• Packaged in quantities of ten for bench stock and production use

Compatibility

Designed as a general-purpose compression spring for light-duty mechanical assemblies requiring a 0.42-inch OD and 1.5-inch free length envelope.

Installation Notes

Compression springs of this size are typically installed by mechanical or maintenance technicians during equipment repair or assembly. Before servicing any spring-loaded mechanism, relieve all stored mechanical energy and follow applicable lockout/tagout procedures. Ensure the mating bore diameter accommodates the 0.438-inch hole diameter specification to prevent binding or misalignment. Do not compress the spring beyond its solid height during installation, as this can cause permanent set and alter the rated spring force.