Value Collection 06811293 Compression Spring 0.36in Od 10pk

Product Description

The VALUE COLLECTION 06811293 is a small-diameter compression spring sold in a pack of 10. It is designed for light-duty mechanical assemblies where precise spring force and compact geometry are required. The spring measures 0.36 inches outside diameter with a free length of 0.75 inches and a wire diameter of 0.035 inches. A spring rate of 12.75 lb/in and a maximum work load of 5.79 pounds make this spring suitable for applications requiring controlled, repeatable resistance within a tight travel range. Machinists, maintenance technicians, and assembly professionals commonly install this type of spring in tooling, fixtures, valves, and general mechanical assemblies.

This compression spring fits applications where a small OD and short free length are needed inside a hole diameter of 0.375 inches. Typical uses include light-load return mechanisms, plunger assemblies, valve seats, and precision fixtures in both industrial and commercial maintenance settings. The solid height of 0.242 inches provides a reference for maximum deflection before coil bind. Each pack contains 10 springs, making it practical for stocking multiple installation points or retaining spares for recurring maintenance work.

Key Features

• 0.36 inch outside diameter fits inside a 0.375 inch hole diameter
• 0.75 inch free length with a solid height of 0.242 inches
• 12.75 lb/in spring rate for predictable, linear resistance
• Maximum work load of 5.79 pounds before reaching solid height
• 0.035 inch wire diameter for fine-pitch, light-duty compression
• Sold in a pack of 10 for convenient stocking and replacement

Compatibility

Designed as a general-purpose compression spring for light-duty mechanical assemblies requiring a 0.36 inch OD and 0.75 inch free length form factor.

Installation Notes

Install and remove compression springs using appropriate hand tools; avoid overstretching or compressing beyond the solid height, as coil bind can permanently damage the spring. Confirm the mating bore or housing matches the 0.375 inch hole diameter specification before installation. In valve or fluid-system applications, depressurize and isolate the system before disassembly. Dispose of worn or set springs and replace with new units rather than reinstalling fatigued components.