Value Collection 06810915 Compression Spring 0.3in Od

Product Description

The VALUE COLLECTION 06810915 is a small-diameter compression spring designed for light-duty mechanical applications requiring consistent linear force over a short travel range. With a 0.3 inch outside diameter and a free length of 1.75 inches, this spring delivers a spring rate of 2.47 lb/in and a maximum work load of 3 lb. Wire diameter is 0.026 inches, and solid height measures 0.387 inches. These springs are typically installed by maintenance technicians, mechanical assemblers, and trade professionals working on equipment that requires precise, repeatable spring force in tight spaces.

This compression spring suits residential and light commercial applications where a compact, low-load spring is required. Typical use cases include valves, latches, switches, small actuators, and general mechanical assemblies. The 0.313 inch hole diameter spec makes it straightforward to locate on a guide pin or within a bored seat. Sold in a package of 10, this spring is a practical stocking item for service shops and field technicians who frequently encounter small spring replacements during equipment repair and maintenance.

Key Features

• 0.3 inch outside diameter fits compact spring pockets and guide pin assemblies
• 2.47 lb/in spring rate provides predictable, linear force for light-load applications
• 3 lb maximum work load rated for low-force mechanical duties
• 0.026 inch wire diameter for fine-pitch coil construction
• 0.387 inch solid height allows for controlled compression travel
• Packaged in quantities of 10 for shop stocking and repeat service use

Compatibility

Designed as a general-purpose replacement compression spring suitable for light-duty mechanical assemblies, valves, latches, and switch mechanisms requiring a 0.3 inch outside diameter and 1.75 inch free length.

Installation Notes

Compression springs should be installed with the work load axis aligned concentrically to prevent side loading and premature fatigue. Before replacing a spring in any assembly, de-energize or depressurize the system as appropriate to the equipment type. Verify the seating surfaces are clean and free of burrs that could damage the wire coils. Do not compress this spring beyond its solid height during installation or operation.