Value Collection 06810691 Compression Spring 0.24 in Od

Product Description

The VALUE COLLECTION 06810691 is a small-diameter compression spring suited for light-duty mechanical assemblies, tooling fixtures, and general industrial applications. It measures 0.24 inches in outside diameter with a 2-inch free length and is wound from 0.032-inch wire. The spring delivers a rate of 6.74 pounds per inch and handles a maximum work load of 6.59 pounds. Installation is straightforward and typically performed by maintenance technicians, machine builders, or assembly workers. Each package contains 10 springs, making it practical for applications requiring multiple units or on-hand spares.

This compression spring is intended for use in equipment where a compact, low-load spring is required. The 0.25-inch hole diameter fit and 0.859-inch solid height make it appropriate for guided spring applications in valves, latches, switches, small actuators, and light mechanical assemblies across industrial, commercial, and MRO settings. Its wire diameter and spring rate suit applications demanding consistent, repeatable force across a moderate deflection range.

Key Features

• 0.24 inch outside diameter sized for compact, tight-clearance installations
• 2 inch free length with a solid height of 0.859 inches
• 6.74 pound-per-inch spring rate for consistent, predictable force output
• 6.59 pound maximum work load suitable for light-duty mechanical applications
• 0.032 inch wire diameter provides a balance of flexibility and load capacity
• Packaged in quantities of 10 for multi-unit or replacement stocking needs

Compatibility

Designed as a general-purpose OEM-style compression spring for light mechanical assemblies requiring a 0.24 inch OD, 2 inch free length spring with a 0.25 inch hole diameter guide fit.

Installation Notes

Compression springs of this type are installed by maintenance technicians and mechanical assemblers. Depressurize or de-energize the host assembly fully before replacing any spring component. Use the hole diameter specification to confirm proper guide pin or bore fit before installation to prevent buckling under load. Verify that the installed spring length and rate match the original design requirements of the assembly.