Value Collection 0401206335--1 End Brush 1 in Brass

Product Description

The VALUE COLLECTION 0401206335--1 is a brass-fill end brush designed for surface preparation, deburring, and cleaning applications in industrial and trade use. The brush measures 1 inch in diameter and accepts a standard shank mount, making it compatible with rotary tools, die grinders, and similar power equipment. Wire diameter ranges from 0.0101 to 0.0200 inches, providing a medium-density fill suited for moderate surface work. Rated to 15,000 RPM, this end brush handles demanding material removal tasks without excessive flex or wire loss at operating speeds. The flared wire configuration increases surface contact area during use.

This end brush is used in maintenance, fabrication, and repair environments where access to tight bores, ports, or recessed surfaces is required. Typical applications include pipe end cleaning before soldering or brazing, weld prep on tube fittings, port cleaning on HVAC and refrigeration components, and general burr removal in metalworking. Brass fill is chosen when contact with ferrous metals or spark-sensitive environments is a concern, as brass wire is softer and non-sparking compared to carbon steel alternatives.

Key Features

• 1 inch brush diameter for consistent surface coverage
• Brass fill wire — non-sparking and suitable for use on soft or ferrous metals
• Wire diameter range of 0.0101 to 0.0200 inches for medium-density cleaning action
• Rated to 15,000 RPM for use with standard die grinders and rotary tools
• Flared wire configuration increases contact area on flat and recessed surfaces
• Includes shank for direct chuck mounting — no adapter required

Compatibility

Designed for use with rotary tools and die grinders that accept standard shank-mount end brushes. Confirm shank diameter matches the tool chuck before installation.

Installation Notes

Install and remove only with the tool fully powered down and the energy source disconnected or locked out. Secure the shank fully in the tool chuck before operation and verify the tool RPM rating meets or exceeds 15,000 RPM. Always wear appropriate eye protection when operating rotary brushes. Do not exceed the rated maximum RPM marked on the brush or its packaging.