Value Collection 03308590 Compression Spring 0.48in Od

Product Description

The VALUE COLLECTION 03308590 is a stainless steel compression spring designed for light-duty mechanical and industrial applications. It measures 0.48 inches in outside diameter with a free length of 1.5 inches and a wire diameter of 0.054 inches. The spring delivers a rate of 15 lb/in and handles a maximum work load of 12.27 pounds. Its stainless steel construction resists corrosion, making it suitable for environments where moisture or chemical exposure is a factor. Maintenance technicians, mechanical assemblers, and trade professionals install this type of spring in equipment assemblies, valves, latches, and similar hardware requiring consistent return force.

This compression spring fits applications where a 0.48-inch OD and 1.5-inch free length are required. The 0.5-inch hole diameter clearance allows straightforward installation into standard bored housings or over guide pins. It is suited for residential and light commercial mechanical systems, HVAC equipment components, plumbing valve assemblies, and general industrial hardware. With a solid height of 0.581 inches, it provides a defined compression travel range appropriate for moderate-duty cycling applications.

Key Features

• Stainless steel construction for corrosion resistance in wet or chemically exposed environments
• Spring rate of 15 lb/in for predictable, linear deflection under load
• Maximum work load of 12.27 pounds
• Outside diameter of 0.48 inches fits 0.5-inch bore housings
• Solid height of 0.581 inches defines usable compression travel
• Wire diameter of 0.054 inches provides consistent coil geometry

Compatibility

Designed as a standard-dimension compression spring suitable for general mechanical assemblies, valve bodies, latches, and equipment requiring a 0.48-inch OD and 1.5-inch free length spring with a 15 lb/in rate.

Installation Notes

Compression springs of this type are installed by mechanical technicians and trade professionals as part of valve, actuator, or equipment assembly work. Ensure the mating bore or guide pin dimensions match the spring OD and ID before installation. Relieve all system pressure or stored mechanical energy before removing or replacing springs in pressurized or loaded assemblies. Inspect seating surfaces for burrs or deformation that could cause uneven load distribution or premature fatigue.