Value Collection 0320012320 Wheel Brush 8 in Crimped Brass

Product Description

The VALUE COLLECTION 0320012320 is an 8-inch diameter wheel brush designed for surface preparation, deburring, cleaning, and finishing on metal and other hard materials. It uses crimped brass wire fill, which provides a flexible, fine-finish action suited for contoured surfaces and parts where a softer touch is needed compared to carbon steel wire. The brush mounts via a 5/8-inch arbor hole and is rated to a maximum of 4,500 RPM. At 0.75 pounds, it is a lightweight bench or angle-grinder compatible tool installed by machinists, maintenance technicians, fabricators, and industrial tradespeople.

This wheel brush is used in industrial, manufacturing, and maintenance shop environments for tasks such as weld spatter removal, oxide scale cleaning, rust removal, and general surface conditioning. The crimped wire construction reduces wire breakage during aggressive passes and suits applications where workpiece surface finish must be preserved. The brass fill material makes it appropriate for use on softer metals and in spark-sensitive environments where steel wire brushes would pose a hazard.

Key Features

• 8-inch outside diameter for broad surface coverage per pass
• Crimped brass wire fill for flexible, fine-finish cleaning action
• 5/8-inch arbor hole for standard arbor-mount spindles
• 1/2-inch face width for focused contact on narrow workpiece areas
• 1-3/4-inch trim length for good wire flex and reach
• Rated to 4,500 RPM maximum operating speed
• Suitable for spark-sensitive environments due to brass wire construction

Compatibility

Designed for use with arbor-hole spindle mounts accepting a 5/8-inch arbor. Typical applications include bench grinders and arbor-mounted rotary tools with compatible spindle sizing. No shank is included.

Installation Notes

Installation requires a bench grinder, pedestal grinder, or arbor-mount spindle with a 5/8-inch arbor. Always power down and lock out the grinder before mounting or removing the brush. Verify that the machine spindle speed does not exceed the 4,500 RPM maximum rating of this brush before operation. Always use appropriate eye protection and follow applicable ANSI B11 and OSHA standards for abrasive wheel and wire brush safety.