Value Collection 0315010335 6 in Crimped Brass Wheel Brush

Product Description

The VALUE COLLECTION 0315010335 is a 6-inch diameter wheel brush designed for aggressive surface preparation, deburring, cleaning, and finishing on metal, weld seams, and fabricated parts. Fitted with crimped brass wire filaments ranging from 0.0100 to 0.0199 inches in diameter, the brush delivers consistent scrubbing action with reduced risk of ferrous contamination on non-ferrous workpieces. It mounts via a standard arbor hole measuring 5/8 inches and is rated to a maximum of 6,000 RPM. Machinists, fabricators, and maintenance technicians reach for this brush when a non-sparking or non-contaminating abrasive media is required for the job.

This wheel brush is suited for bench grinder, arbor press, or powered spindle setups in production shops, maintenance facilities, and job sites. The 1-inch face width and 1-1/8 inch trim length give the brush enough contact area and flex to work into surface irregularities and weld zones. Brass wire construction makes it a practical choice for cleaning copper, brass, aluminum, and other non-ferrous metals where steel wire would leave behind embedded particles or cause galvanic issues.

Key Features

• 6-inch outside diameter for broad surface contact on bench grinder or spindle setups
• Crimped brass wire filaments for non-ferrous, non-sparking cleaning and surface prep
• Wire diameter range of 0.0100 to 0.0199 inches balances aggression with surface control
• 5/8-inch arbor hole for standard bench grinder and spindle compatibility
• 1-inch face width and 1-1/8 inch trim length for effective reach and flex
• Rated to 6,000 RPM for use on common bench grinder speeds

Compatibility

Designed for use with standard arbor hole bench grinders and powered spindles accepting a 5/8-inch arbor mount.

Installation Notes

Installation is performed by machinists or maintenance technicians on bench grinders or similar spindle equipment. Always confirm the machine spindle speed does not exceed the 6,000 RPM rating before mounting. Power down and lock out the machine before mounting or removing the brush. Ensure the arbor nut is properly seated and tightened according to the equipment manufacturer specifications before operating.