Value Collection 0110058335 Cup Brush 4 in Brass

Product Description

The VALUE COLLECTION 0110058335 is a crimped-wire cup brush designed for surface preparation, weld cleaning, rust removal, and deburring on metal workpieces. The brush features a 4-inch diameter brass wire fill with a wire diameter of 0.014 inches, making it well suited for applications that require a non-sparking, corrosion-resistant abrasive medium. The threaded 5/8-11 arbor hole mounts directly to compatible angle grinders and bench grinders. With a maximum rated speed of 9,000 RPM and a trim length of 1-1/8 inches, this brush delivers consistent contact across curved and flat surfaces.

This cup brush is commonly used in industrial maintenance, fabrication shops, plumbing, and HVAC service work where technicians need to clean pipe ends, remove scale, or prep metal surfaces before welding or brazing. The brass fill is a preferred choice when working on copper, brass, or soft metal components, or in environments where steel wire brushes are not permitted due to contamination or spark concerns. It is suitable for light to medium surface conditioning tasks in both shop and field settings.

Key Features

• Brass crimped wire fill for non-sparking, non-contaminating surface preparation
• 4-inch brush diameter provides broad contact area for efficient coverage
• 0.014-inch wire diameter delivers flexible, consistent abrasion on irregular surfaces
• 5/8-11 threaded arbor hole for direct mounting on standard angle grinders and bench grinders
• 1-1/8-inch trim length maintains stable wire contact throughout the brush life
• 9,000 RPM maximum rated speed for compatibility with common grinder tool speeds

Compatibility

Designed for use with angle grinders and bench grinders equipped with a standard 5/8-11 threaded arbor. Verify that the tool speed does not exceed the 9,000 RPM maximum rating before use.

Installation Notes

Installation should be performed by a qualified technician familiar with angle grinder or bench grinder safety practices. Power down and disconnect the tool from its power source before mounting or removing the brush. Ensure the arbor nut is tightened securely and that the brush is rated at or above the maximum no-load RPM of the tool before operation. Always use appropriate eye protection and guarding in accordance with applicable ANSI and OSHA standards when operating wire brushes.