Usa Industrials BULK-RS-N50-282 Neoprene Strip 4x60in

Product Description

The USA INDUSTRIALS BULK-RS-N50-282 is a black neoprene rubber strip stocked in a 4-inch wide by 60-inch long cut, rated at 50 Shore A durometer. It is a general-purpose elastomeric sealing and gasketing material used across HVAC, plumbing, electrical, and mechanical trades. The 50A hardness delivers a medium-firm compression feel suitable for vibration dampening, sealing flanges, and cushioning applications. Tensile strength ranges from 1000 to 1200 psi, making it durable enough for light mechanical loading. Neoprene construction provides resistance to weathering, ozone, and moderate oil exposure. Technicians and installers cut it to length on site with standard utility knives or scissors.

This strip is suited for residential and commercial installations where a pre-cut stock-length rubber material is needed quickly. Common applications include HVAC equipment vibration isolation pads, pipe and conduit cushioning, door and panel gaskets, and surface protection in mechanical rooms. The 60-inch stock length gives enough material for most single-trade applications without ordering custom cuts. The black color is standard for neoprene and indicates no special compounding beyond the base material.

Key Features

• 50 Shore A durometer for medium-firm compression and flexibility
• Tensile strength of 1000 to 1200 psi for light mechanical load resistance
• Temperature range of -40 degrees F to 212 degrees F for broad service conditions
• Stock length of 60 inches allows on-site trimming to fit
• Neoprene construction resists weathering, ozone, and moderate oil exposure
• Black colorway consistent with standard neoprene gasketing material

Compatibility

Designed as a general-purpose stock-length neoprene rubber strip suitable for use in HVAC, plumbing, mechanical, and electrical trade applications requiring a 4-inch wide elastomeric sealing or cushioning material.

Installation Notes

This strip is typically installed by HVAC technicians, plumbers, pipefitters, or general mechanical contractors. Cut to length using a sharp utility knife, straight edge, and cutting mat for clean edges. No special fasteners are required for most gasketing applications, though contact adhesive may be used to bond the strip to metal or rigid substrates. Ensure mating surfaces are clean and dry before installation to maintain proper seal integrity.