Usa Industrials BULK-RS-EN60-2 Neoprene Sheet 12x12

Product Description

The USA INDUSTRIALS BULK-RS-EN60-2 is a stock-length neoprene rubber sheet cut to 12 inches wide by 12 inches long, with a thickness of 0.062 inches. It carries a Shore A durometer rating of 50 to 60, placing it in the medium-firm range suitable for gaskets, seals, vibration dampeners, and general-purpose padding. The sheet is black and rated for continuous service from -20 degrees F to 220 degrees F. Tensile strength is rated at 900 psi. HVAC technicians, plumbers, pipefitters, and industrial mechanics use neoprene sheet stock to fabricate custom seals and isolator pads in the field.

This neoprene sheet is suited for both commercial and residential applications where a flexible, oil-resistant, and weather-resistant elastomer is required. Common uses include cutting custom flange gaskets, pipe vibration isolation pads, equipment mounting buffers, and duct sealing strips. The 12 inch by 12 inch format provides enough material for most single-piece field cuts without excess waste. Trades working on refrigeration lines, compressor mounting, and plumbing rough-in regularly stock neoprene sheet in this durometer range for on-demand fabrication.

Key Features

• Shore A durometer 50 to 60 - medium-firm hardness for reliable compression sealing
• 0.062 inch thickness suitable for gasket and pad fabrication
• Operating range of -20 degrees F to 220 degrees F for broad thermal compatibility
• 900 psi tensile strength for durable field-cut seals
• 12 inch x 12 inch stock format - easy to cut with utility knife or die
• Neoprene compound resists oils, weathering, and moderate chemical exposure

Compatibility

Designed as a general-purpose neoprene rubber sheet for use across HVAC, plumbing, refrigeration, and industrial maintenance applications requiring a medium-durometer elastomer gasket or pad material.

Installation Notes

Cut to shape using a sharp utility knife, gasket punch set, or die cutter on a flat, stable surface. Ensure mating surfaces are clean and free of debris before installing a field-cut gasket or seal. Confirm that the application temperature range and fluid exposure are within the rated limits of neoprene before installation. No special certifications are required to handle or install neoprene sheet stock, though end-use assemblies must comply with applicable mechanical and plumbing codes.