Tru-maxx 7444 Abrasive Belt 150 Grit 2x60 in Aluminum Oxide

Product Description

The TRU-MAXX 7444 is a coated abrasive belt designed for dry sanding and finishing applications on stationary and handheld belt sanders. It measures 2 inches wide by 60 inches long and runs at 150 grit, placing it in the very fine grade range. The abrasive material is aluminum oxide, bonded in a closed-coat configuration onto a polyester cloth backing rated at X-weight, which provides the rigidity and tear resistance needed for demanding stock removal and surface prep work. Machinists, metalworkers, woodworkers, and fabrication shop technicians are the primary users of this belt.

This belt is suited for fine finishing passes on wood, metal, and composite surfaces where a smooth, refined finish is the goal. At 150 grit very fine grade, it is typically used toward the end of a sanding sequence to refine surfaces left by coarser belts. The closed-coat construction keeps abrasive grain density high, delivering consistent cutting action across the full belt surface. It is appropriate for bench-mounted belt sanders and floor-standing grinder-polisher setups that accept a 2 by 60 inch belt.

Key Features

• 150 grit very fine grade for final smoothing and finish preparation
• Aluminum oxide abrasive material for consistent cutting on wood and metal
• Closed-coat construction maximizes grain coverage for uniform surface finish
• X-weight polyester cloth backing resists tearing under tension and heat
• Dry-use configuration compatible with standard belt sander operation

Compatibility

Designed as a replacement or consumable abrasive belt for belt sanders and grinder-polishers that accept a 2 inch by 60 inch belt format.

Installation Notes

Belt installation should be performed by a qualified operator with the sander unplugged or the machine locked out per OSHA lockout/tagout procedures. Verify belt tracking alignment before powering on to prevent edge wear or belt failure. Inspect the platen and contact wheel for debris before mounting a new belt. Replace the belt when cutting action degrades noticeably or surface finish quality drops.