Tru-maxx 7306 Abrasive Belt 80 Grit 4x132 in Aluminum Oxide

Product Description

The TRU-MAXX 7306 is a coated abrasive belt designed for dry belt sanding applications on metal, wood, and composite surfaces. Built on a heavy-duty X-weight polyester cloth backing, it delivers consistent stock removal and resists tearing under load. The belt runs 4 inches wide by 132 inches long and carries an 80-grit aluminum oxide abrasive in a closed-coat density pattern. Closed-coat construction means abrasive grains cover the full surface, maximizing cut rate on medium-grade material removal tasks. Fabricators, maintenance technicians, and production grinders working with stationary or floor-standing belt sanders will find this belt suited to general-purpose surface preparation and deburring work.

This belt is used in dry sanding operations where aggressive, medium-grade stock removal is needed. Typical applications include weld seam blending, scale removal, and surface prep on steel, aluminum, and hardwood. The 4 x 132 inch format fits wide belt sanding machines and heavy-duty floor-standing units common in metalworking shops and industrial maintenance environments. Aluminum oxide abrasive holds up well under high-pressure contact and maintains cut consistency through extended use cycles.

Key Features

• 80-grit medium-grade cut for efficient stock removal and surface prep
• Aluminum oxide abrasive material for durable performance on metal and wood
• Closed-coat density maximizes abrasive coverage and cutting efficiency
• X-weight polyester cloth backing resists tearing and flexing under load
• Dry-operation belt — not rated for wet or coolant-flooded use
• 4 inches wide by 132 inches long to fit wide-belt industrial sanders

Compatibility

Designed as a replacement or production-supply abrasive belt for stationary and floor-standing belt sanders accepting a 4 x 132 inch belt format.

Installation Notes

Belt installation should be performed by the machine operator or maintenance technician with the sander powered off and unplugged or locked out per OSHA lockout/tagout procedures. Verify belt tracking adjustment before running under load and confirm the arrow on the belt inner surface aligns with the machine rotation direction if marked. Do not use this belt in wet or coolant-flooded conditions, as it is rated for dry operation only.