Tru-maxx 7133 Abrasive Belt 1-1/2x60 in 240 Grit Aluminum Oxide

Product Description

The TRU-MAXX 7133 is a coated abrasive belt designed for dry precision sanding and finishing operations on metal, wood, and composite surfaces. Measuring 1-1/2 inches wide by 60 inches long, this belt runs on standard narrow-belt sanders and is built for consistent material removal at a 240-grit, very fine grade. The aluminum oxide abrasive grain is applied in a closed-coat pattern over an X-weight polyester cloth backing, delivering durability and uniform scratch patterns suited to finish work and surface preparation in shop and field environments.

This belt is suited for light stock removal, deburring, and pre-finishing tasks in fabrication shops, maintenance facilities, and trade service environments. The closed-coat aluminum oxide construction performs well on ferrous and non-ferrous metals, hardwood, and painted surfaces. At 240 grit, it is typically used in final or near-final finishing passes where surface smoothness and scratch consistency matter most. Dry operation only — do not use with coolant or cutting fluid.

Key Features

• 240 grit, very fine grade for finish sanding and surface blending
• Aluminum oxide abrasive grain — durable across metal, wood, and composite materials
• Closed-coat construction for uniform scratch pattern and consistent cut
• X-weight polyester cloth backing for flexibility and tensile strength under load
• 1-1/2 inches x 60 inches — fits standard narrow-belt sanding machines
• Dry operation only — optimized for use without liquid coolants

Compatibility

Designed as a direct-fit replacement belt for narrow-belt sanders and finishing machines accepting a 1-1/2 inch by 60 inch abrasive belt.

Installation Notes

Installation should be performed by a qualified operator familiar with belt sander safety procedures. Confirm the machine is powered off and unplugged before changing belts. Verify belt tension and tracking adjustment after installation and before resuming operation. Inspect the belt for tears or separation at the splice joint before each use and replace if damage is found.