Tru-maxx 66261114536 Deburring Wheel 6 in Aluminum Oxide

Product Description

The TRU-MAXX 66261114536 is a convolute deburring wheel designed for edge blending, light deburring, and surface finishing on metal workpieces. Built with aluminum oxide abrasive at a density rating of 8 and a hard density grade, this wheel delivers consistent, controlled material removal without loading. At 6 inches in diameter with a 2-inch face width and a 1-inch center hole, it mounts directly on bench grinders using a compatible mandrel or adapter. Maximum rated speed is 4,500 RPM. Machinists, fabricators, and tool room technicians use this wheel for finishing operations that require repeatable results across production runs.

This deburring wheel is suited for bench grinder applications in metalworking shops, machine shops, and fabrication facilities. The convolute construction bonds aluminum oxide abrasive grains into a dense, layered structure that maintains its profile through the wheel life, making it appropriate for both low-volume finishing work and recurring production deburring tasks. Compatible mandrel sizes are No. 3 and No. 5, which are standard adapters for this wheel diameter class.

Key Features

• Aluminum oxide abrasive with hard density grade for aggressive, consistent deburring action
• Density rating of 8 for firm contact and controlled cut on metal edges and surfaces
• Convolute wheel construction maintains profile and abrasive exposure throughout wheel life
• 6-inch diameter and 2-inch face width sized for standard bench grinder setups
• Rated to 4,500 RPM maximum operating speed
• Compatible with No. 3 and No. 5 mandrel adapters

Compatibility

Designed for use on bench grinders with No. 3 or No. 5 mandrel adapters. Verify spindle speed does not exceed the 4,500 RPM maximum wheel rating before mounting.

Installation Notes

Installation should be performed by a qualified machinist or toolroom technician familiar with abrasive wheel safety. Power down and lock out the bench grinder before mounting or removing the wheel. Confirm mandrel and adapter fit the 1-inch center hole and that the grinder spindle speed does not exceed 4,500 RPM. Inspect the wheel for cracks or damage before each use and run the wheel with the guard in place during initial startup.