Tritan UCFL201-8S (40M 2-bolt Flange Bearing 1/2 in Id

Product Description

The TRITAN UCFL201-8S (40M is a 2-bolt flange bearing unit designed for shaft support in rotating equipment across industrial, agricultural, and mechanical drive applications. The cast iron housing pairs with a 52100 steel wide inner ring insert to deliver a static load capacity of 1,495 pounds and a dynamic load capacity of 2,878 pounds. The unit measures 3.9 inches overall length by 1.22 inches overall height, with a 0.5 inch (1/2 inch) inside diameter bore. A set screw lock secures the shaft, and the housing requires lubrication at regular service intervals. Millwrights, maintenance technicians, and equipment repair professionals are the primary installers of this type of unit.

This flange unit is suited for light-to-medium duty shaft mounting in conveyor systems, fans, blowers, augers, and general power transmission equipment. The 2-bolt flange configuration allows the unit to mount flat against a surface with 3/8 inch bolts spaced 3 inches center-to-center between bolt holes. The base-to-center height of 0.43 inches provides a low-profile mounting footprint. It is appropriate for residential, commercial, and light industrial machinery where a standard UCFL-series flange bearing is specified.

Key Features

• 1/2 inch (0.5 inch) inside diameter bore for direct shaft mounting
• 1,495 lb static load capacity and 2,878 lb dynamic load capacity
• Cast iron housing with 52100 steel wide inner ring insert
• Set screw lock type for positive shaft retention
• 2-bolt flange mount with 3/8 inch bolt size and 3 inch bolt hole center-to-center spacing
• Lubrication-required design for extended service life with proper maintenance

Compatibility

Designed as an OEM-style replacement for standard UCFL-series 2-bolt flange bearing units requiring a 1/2 inch bore and cast iron housing construction.

Installation Notes

Installation is typically performed by a qualified millwright or maintenance technician. Shut down and de-energize all rotating equipment and lock out the drive system before removing or installing any bearing unit. Ensure the mounting surface is flat and clean before securing the housing bolts, and torque fasteners to the equipment manufacturer's specification using 3/8 inch hardware. Apply the appropriate grease through the lubrication fitting before placing the unit into service.