Tripp Lite N356-30M Duplex Sm Fiber Patch Cable Sc/sc

Product Description

The TRIPP LITE N356-30M is a duplex single-mode fiber optic patch cable with SC/SC connectors and an 8.3/125 micron core/cladding configuration. It is designed for high-bandwidth data transmission over long distances in structured cabling systems, telecommunications closets, and data centers. The duplex construction supports simultaneous bidirectional signal transmission, making it suitable for active network equipment that requires separate transmit and receive fibers. Licensed network technicians, IT infrastructure professionals, and low-voltage cabling contractors are the typical installers of this cable type.

This patch cable is used in single-mode fiber optic network installations where SC-type bulkhead connectors are present on patch panels, media converters, switches, or transceivers. At 30 meters in length, it is well suited for inter-rack runs, equipment room cross-connects, and longer intra-facility horizontal links where multimode fiber would not provide adequate reach. Both residential structured cabling and commercial network infrastructure applications are common use cases.

Key Features

• Duplex single-mode 8.3/125 micron fiber construction for long-distance, high-bandwidth links
• SC/SC connector configuration on both ends for direct termination to SC-type ports and panels
• 30-meter cable length accommodates inter-rack and cross-connect runs
• Duplex jacket keeps transmit and receive fibers paired and organized
• Physical contact (PC) polish on connectors reduces back-reflection at the fiber interface

Compatibility

Designed as an OEM-style replacement or standard patch cable for single-mode SC-port fiber infrastructure including patch panels, media converters, and fiber-capable switches with SC-type bulkhead interfaces.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician or network infrastructure professional familiar with fiber optic handling practices. Inspect ferrule end-faces for contamination and clean with appropriate fiber optic cleaning tools before insertion to avoid signal loss. Do not exceed the minimum bend radius of the cable during routing, as excessive bending can damage the fiber core. Power down or place connected equipment ports in a disabled state before connecting or disconnecting fiber patch cables to protect optical transceivers.