Tradepro tp-e75-mhp2 Evaporator Motor 4 Speed 3/4 Hp

Product Description

The TRADEPRO tp-e75-mhp2 is a multi-speed evaporator blower motor designed for residential and light commercial HVAC air handler and fan coil applications. Rated at 3/4 HP with a maximum output range spanning 3/4 to 1/5 horsepower across its four selectable speeds, this motor operates at 1075 RPM and runs on 230 volts. It is a direct replacement-style unit intended for installation by licensed HVAC technicians servicing split-system or packaged air conditioning equipment. The multi-speed configuration allows the motor to match airflow requirements across different system setups and seasonal operating modes.

This motor is suited for evaporator section service in residential central air conditioning and heat pump systems. Its four-speed design supports standard high, medium-high, medium, and low airflow selections commonly required by air handler manufacturers. Typical installations involve replacing failed or degraded OEM blower motors in indoor air handler cabinets where 230-volt single-phase power is present. HVAC technicians working on split systems, fan coil units, and multi-speed air handlers will find this motor applicable across a range of evaporator blower configurations.

Key Features

• Four selectable speeds for flexible airflow matching across system configurations
• 1075 RPM operating speed standard for evaporator blower applications
• Multi-horsepower range from 3/4 HP down to 1/5 HP across speed taps
• 230-volt single-phase operation compatible with standard residential air handler wiring
• OEM-style replacement form factor for straightforward swap-out service

Compatibility

Designed as an OEM-style replacement evaporator blower motor for residential and light commercial air handlers and fan coil units requiring a 4-speed, 1075 RPM, 230-volt motor in the 3/4 to 1/5 multi-horsepower class.

Installation Notes

Installation should be performed by a licensed HVAC technician. Disconnect and lock out power to the air handler at the disconnect and breaker before removing the existing motor. Verify that the replacement motor shaft diameter, rotation direction, and mounting configuration match the original before completing the install. Confirm speed tap wiring against the system wiring diagram before restoring power.

Technical Specifications

• Horsepower: 3/4 to 1/5 HP (multi-horsepower)
• Number of Speeds: 4
• RPM: 1075
• Voltage: 230 volts

Standard Information

• Brand: TRADEPRO
• Manufacturer Part Number: tp-e75-mhp2