Tpi E2910-048SW Electric Baseboard Heater 1000W 48 in

Product Description

The TPI E2910-048SW is a 120-volt electric baseboard heater rated at 1000 watts and 3413 BTU/h, designed for permanent wall-mount installation in residential and light commercial spaces. The unit measures 48 inches in length with a low-profile housing standing 6 inches tall and 2.5 inches deep. Heating is delivered through a stainless steel element with aluminum fins for efficient heat transfer along the full length of the unit. A thermostat is included, allowing direct temperature control without a separate wall control. The white housing blends with standard interior finishes. At 8.3 amps on a 120-volt circuit, the heater fits a standard 15-amp branch circuit.

This baseboard heater is suited for bedrooms, offices, sunrooms, additions, and other spaces requiring supplemental or primary electric heat. Wall-mount installation keeps floor space clear and allows heat to rise naturally into the room. The included thermostat makes this a self-contained unit, reducing the need for additional controls. It is a practical choice for electricians and contractors completing new construction or retrofit heating work where forced-air systems are not present or not practical.

Key Features

• 1000-watt output with 3413 BTU/h heating capacity on 120 volts
• Stainless steel heating element with aluminum fins for durable, efficient heat transfer
• 48-inch length with low-profile 6-inch height and 2.5-inch depth
• Thermostat included for integrated temperature control
• Wall-mount design keeps floor area unobstructed
• ETLus listed for safety compliance

Compatibility

Designed as a wall-mount electric baseboard heater for 120-volt single-phase circuits in residential and light commercial heating applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Turn off and lock out the branch circuit at the panel before making any wiring connections. The heater requires a dedicated circuit sized appropriately for the amperage draw. Mount the unit along an exterior wall or under windows for best thermal performance, following the manufacturer clearance requirements for combustibles.