Tpi 04804802 Infrared Suspended Heater 10239 Btu/h

Product Description

The TPI 04804802 is a single-phase infrared suspended heater rated at 10,239 BTU/h and 240 volts, designed for overhead mounting in commercial and industrial spaces. It uses a quartz tube element to deliver radiant heat directly to the occupancy zone below, without heating the surrounding air volume first. The stainless steel housing holds up in demanding environments. At 12.5 amps draw on a 240-volt circuit, it fits standard dedicated branch wiring. HVAC contractors and electricians install this unit in warehouses, garages, loading docks, workshops, and covered outdoor structures where forced-air heating is impractical or inefficient.

The 04804802 is suited for both indoor and outdoor applications. Typical installs include commercial garages, agricultural buildings, covered patios, and industrial work areas where ceiling or overhead mounting is available. The quartz tube element produces medium-wave infrared radiation, which heats objects and occupants directly rather than circulating warm air. This makes it effective in spaces with high ceilings, open doors, or poor insulation where convective heating would be inefficient.

Key Features

• 10,239 BTU/h heating capacity from a single quartz tube element
• 240-volt, single-phase operation at 12.5 amps maximum
• Quartz tube element delivers radiant infrared heat for direct zone heating
• Stainless steel housing rated for indoor and outdoor use
• Compact profile: 57 inches long, 5.5 inches wide, 3.375 inches high
• ETLus listed for safety compliance

Compatibility

Designed for suspended overhead mounting in single-phase 240-volt electrical systems. Suitable for indoor and outdoor installations where a dedicated 240-volt branch circuit is available.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC and applicable local codes. Disconnect and lock out power at the panel before any wiring work. Follow the manufacturer-specified minimum clearance distances from combustibles and mounting height requirements for safe radiant heater operation. Outdoor installations must protect the electrical connection from direct moisture exposure per code requirements.