Tool-flo 96501208 Internal Threading Toolholder 3/4 in

Product Description

The TOOL-FLO 96501208 is an indexable internal threading toolholder designed for right-hand cutting operations on lathes and turning centers. Part of the Flo-Lock series, it accepts FL 2L inserts held by a clamp-style insert retention system. The toolholder features a 3/4 x 3/4 inch square shank, a 10-inch overall length, and a minimum bore diameter of 1.125 inches. Coolant-through capability is built in, supporting chip evacuation and tool life in demanding threading applications. This toolholder is suited for machinists and toolroom professionals running internal threading and grooving operations in production or job-shop environments.

The 96501208 is applied in internal threading and grooving operations where a right-hand toolholder configuration is required. The A12 toolholder style and 0.562-inch center-to-cutting-edge dimension make it appropriate for medium-bore internal work with a minimum bore diameter of 1.125 inches. It is used in CNC turning centers and manual lathes where repeatable insert indexing and secure clamping are priorities. The multi-use designation means a single holder can support both threading and grooving insert configurations, reducing tooling inventory requirements.

Key Features

• Right-hand cutting orientation with A12 toolholder style
• Accepts FL 2L inserts with clamp-style insert retention
• 3/4 x 3/4 inch shank for standard tool post and turret compatibility
• Coolant-through design for improved chip control and tool life
• Suitable for both internal threading and grooving applications
• Multi-use tool reduces tooling inventory needs

Compatibility

Designed for use with FL 2L indexable inserts. Compatible with internal threading and grooving setups requiring an A12-style right-hand toolholder with a 3/4 inch shank.

Installation Notes

Installation should be performed by a qualified machinist familiar with lathe tooling setup and insert clamping procedures. Always power down and lock out the machine before changing or indexing inserts. Verify shank seating and clamp torque per your machine tool manufacturer guidelines before resuming cuts. Confirm coolant-through passages are clear and properly connected before running at production feeds and speeds.