Tool-flo 592047RJ5R Grooving Insert GP3 Solid Carbide

Product Description

The TOOL-FLO 592047RJ5R is a solid carbide grooving insert designed for precision OD grooving and parting operations on CNC lathes and turning centers. This right-hand insert carries a GP3 manufacturer grade with a TiN (titanium nitride) PVD coating applied over a micrograin carbide substrate, delivering wear resistance and edge integrity across a range of workpiece materials. The cutting width measures 2.39 mm (0.0941 inches) with a maximum depth of cut of 2.79 mm (0.1098 inches). A full-radius geometry with a 3/64-inch corner radius and a positive rake angle of 55 degrees supports clean chip formation and reduced cutting forces. This insert is installed by machinists and toolroom technicians performing grooving, parting, and profiling work.

The 592047RJ5R belongs to the TOOL-FLO Flo-Lock series, which is engineered for secure insert retention in compatible Flo-Lock toolholders. It is suited for applications in general turning environments with a secondary workpiece material rating for stainless steel, making it appropriate for both production and job-shop settings where groove geometry consistency is critical. The ISO code for this insert is FLR-2047R. Maximum depth of cut range is 2.00 mm to 3.00 mm (0.1000 to 0.1500 inches), and the cutting height is 0.2190 inches.

Key Features

• Solid micrograin carbide substrate with PVD-applied TiN coating for extended tool life
• 2.39 mm (0.0941 inches) cutting width for precise groove sizing
• Full-radius geometry with 3/64-inch corner radius reduces stress concentration at groove base
• Positive rake angle (55 degrees) promotes lower cutting forces and cleaner chip evacuation
• Right-hand cutting orientation; ISO code FLR-2047R
• Rated for stainless steel as a secondary workpiece material

Compatibility

Designed for use in TOOL-FLO Flo-Lock series toolholders compatible with the FLR-2047R insert style and size 2047 seating. ISO code FLR-2047R corresponds to MSC/Manufacturer reference FLR-2047R/L. Verify toolholder pocket specifications before installation to confirm proper insert retention and alignment.

Installation Notes

Installation is performed by qualified machinists following standard CNC tooling change procedures. Power down and lock out the machine spindle before seating or removing inserts. Use the appropriate torx or clamping key specified for the Flo-Lock toolholder to achieve proper clamping force without over-torquing the insert pocket. Inspect the toolholder pocket and seating surfaces for chips or wear before installing a fresh insert.