Titan Usa TR96214 Chucking Reamer 25/32 in Hss 8 Flute

Product Description

The TITAN USA TR96214 is a high-speed steel chucking reamer designed to finish-ream drilled or bored holes to a precise 0.7812 inch diameter. It features 8 straight flutes ground from uncoated HSS stock, producing accurate, smooth bores in a wide range of ferrous and non-ferrous materials. At 9.5 inches overall length with a 2.5-inch flute length, this reamer is suited for through-hole and moderate blind-hole applications. The straight-cylindrical shank seats directly in a drill chuck or collet. Machinists and tool-and-die technicians use this tool on manual lathes, drill presses, and knee mills where controlled stock removal and final bore sizing are required.

The TR96214 belongs to the TITAN USA TR96 series of chucking reamers. It is intended for machine-driven reaming operations in job shops, maintenance facilities, and production environments. Typical applications include sizing bearing bores, pin holes, and bushing fits where consistent diameter tolerance and surface finish matter. The uncoated HSS construction makes it well-suited for general-purpose use in mild steel, cast iron, aluminum, brass, and similar materials at conventional cutting speeds.

Key Features

• 0.7812 inch (25/32 inch) finished bore diameter for precise hole sizing
• 8 straight flutes for smooth cutting action and even chip load distribution
• High-speed steel construction provides toughness and resharpening capability
• Uncoated finish suited for general-purpose machining across common materials
• Straight-cylindrical shank for direct chuck or collet mounting
• 9.5 inch OAL with 2.5 inch flute length accommodates standard machine setups

Compatibility

Designed as an OEM-style chucking reamer for use in drill presses, lathes, and milling machines equipped with a standard drill chuck or collet capable of holding a straight-cylindrical shank.

Installation Notes

Chucking reamers are installed and operated by machinists following standard machine-shop practices. Secure the shank fully in a rigid drill chuck or collet and verify runout before cutting. Always apply appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Use recommended reaming speeds, which are typically lower than drilling speeds, and never reverse the reamer while it is in contact with the workpiece.