Titan Usa TR96192 Chucking Reamer 0.6260 in Hss 8 Flute

Product Description

The TITAN USA TR96192 is a chucking reamer designed for precision hole finishing in metalworking applications. Built from high speed steel (HSS), this reamer delivers consistent bore accuracy and smooth surface finish in production and job-shop environments. It features 8 straight flutes and a straight cylindrical shank, measuring 0.6260 inches in diameter with a 9 inch overall length and a 2.25 inch flute length. The uncoated HSS construction suits general-purpose reaming in ferrous and non-ferrous materials. Machinists and tool-and-die professionals reach for this tool when final bore sizing demands tight tolerances that drilling alone cannot achieve.

This chucking reamer is intended for use in drill presses, lathes, and milling machines where the shank is held in a chuck or collet. It fits standard machine setups for finish reaming through-holes and blind holes in steel, cast iron, aluminum, and similar materials. The straight flute geometry makes it well suited for chipping materials that produce short chips. It is a practical choice for production runs and maintenance shops requiring repeatable hole sizing to nominal diameter.

Key Features

• 0.6260 inch reamer diameter for precise bore finishing
• High speed steel construction for durability in general-purpose machining
• 8 straight flutes for smooth cutting action and chip clearance
• 9 inch overall length with 2.25 inch flute length
• Straight cylindrical shank for reliable chuck or collet holding
• Uncoated finish suitable for use with standard cutting fluids

Compatibility

Designed as an OEM-style machine reamer for use in standard drill press, lathe, and milling machine setups that accept a straight cylindrical shank tool in the appropriate diameter range.

Installation Notes

Chucking reamers are installed and removed by a qualified machinist following standard lockout and machine-stop procedures before tool changes. Secure the straight shank firmly in a chuck or collet to minimize runout. Apply appropriate cutting fluid for the workpiece material to extend tool life and improve finish quality. Never use a chucking reamer to remove excessive stock — drilling to within a few thousandths of final size before reaming is standard practice.