Titan Usa TC58280 Square End Mill 0.08 in 4 Flute Carbide

Product Description

The TITAN USA TC58280 is a 4-flute solid carbide square end mill designed for precision milling operations in metal and hard material applications. With a 0.0800-inch cutting diameter and an AlTiN coating, this tool handles high-temperature cutting environments where tool life and edge retention are priorities. The micrograin carbide substrate provides rigidity and wear resistance at small diameters. A 30-degree helix angle promotes efficient chip evacuation while reducing cutting forces. This end mill is installed and used by machinists and CNC operators working in job shops, production facilities, and tool rooms.

This end mill is suited for slot milling, profiling, and finishing passes in ferrous and non-ferrous metals where a small-diameter, short-length-of-cut tool is required. The 0.24-inch length of cut accommodates shallow-to-moderate depth passes. The 0.125-inch shank fits standard 1/8-inch collets commonly found on CNC machining centers and manual mills. Its centercutting capability allows plunge entry. Right-hand cut and right-hand flute orientation are standard for conventional CNC setups.

Key Features

• 0.0800-inch cutting diameter for fine detail and tight-tolerance milling
• AlTiN coating for heat resistance and extended tool life in hard materials
• Micrograin solid carbide construction for rigidity and edge stability at small diameters
• 30-degree helix angle with upcut flute direction for effective chip removal
• Centercutting design allows direct plunge entry
• 4-flute configuration balances chip load and surface finish

Compatibility

Designed for use with standard 1/8-inch collet systems on CNC machining centers and manual milling machines. Suitable for machining ferrous metals, hardened steels, and similar materials where AlTiN coating performance is beneficial.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in a safe, de-energized state before changing tooling. Seat the shank fully into the collet and tighten to the collet manufacturer torque specification. Verify runout with a dial indicator before beginning production cuts, especially at this diameter where runout has an outsized effect on tool life and cut quality.