Titan Usa TC53653 Square End Mill 1.9mm 3 Flute Carbide

Product Description

The TITAN USA TC53653 is a single-end, square-profile end mill designed for precision milling operations in metalworking and machining environments. Built from micrograin solid carbide, it offers the rigidity and edge retention required for demanding cuts in hardened steels, stainless, and high-temp alloys. The cutting diameter measures 1.9 mm (0.0750 inches), with a 0.9-inch length of cut and a 2.5-inch overall length. A 30-degree right-hand helix promotes efficient chip evacuation, while the AlTiN coating adds thermal resistance and extends tool life in dry or high-speed machining applications. This tool is installed by machinists and CNC operators in production and job-shop settings.

The TC53653 is suited for slotting, profiling, and finishing passes in small-diameter, tight-tolerance work. Its 1/8-inch (0.125-inch) shank fits standard collets and tool holders commonly used on vertical machining centers, CNC mills, and high-speed spindle setups. The centercutting geometry allows plunge entry, adding versatility in multi-operation setups. This end mill is appropriate for applications where fine feature detail and close dimensional control are required.

Key Features

• Micrograin solid carbide construction for superior hardness and wear resistance
• AlTiN coating provides high-temperature oxidation resistance for dry and high-speed cutting
• 30-degree right-hand helix with upcut flute direction for effective chip removal
• Centercutting capable, allowing direct plunge entry into workpiece material
• 1/8-inch shank diameter fits widely available collets and tool holders
• Three flutes balance material removal rate with chip clearance in small-diameter work

Compatibility

Designed as an OEM-style replacement or direct-fit cutting tool for standard 1/8-inch collet systems used on CNC vertical machining centers and manual mills requiring small-diameter end mills.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully powered down and the machine is in a safe state before changing tooling. Seat the shank fully into the collet to the minimum insertion depth recommended by the toolholder manufacturer to prevent pullout under load. Verify runout with a dial indicator after clamping, as excessive runout will accelerate edge wear and reduce part accuracy on small-diameter tools.