Titan Usa TC19235 Solid Carbide Jobber Drill No. 35

Product Description

The TITAN USA TC19235 is a solid carbide jobber-length drill bit sized to wire gauge No. 35, with a decimal diameter of 0.1100 inches (2.80 mm). It features a standard 118-degree split-free point, a bright uncoated finish, and a regular right-hand spiral flute geometry. The straight cylindrical shank and 2.25-inch overall length make this bit well suited for precision small-hole drilling in machining, fabrication, and maintenance applications. Machinists, tool-and-die tradespeople, and general metalworking shops are the primary users of this style of drill bit. The two-flute design promotes clean chip evacuation on through-holes in non-ferrous and soft metallic workpieces.

This drill bit is rated for general-purpose drilling applications with a primary workpiece material classification covering aluminum and non-ferrous metals. It fits standard drill chucks that accept a 0.1100-inch straight shank and is appropriate for use in CNC drilling centers, drill presses, and hand-held power drills where a collet or keyless chuck can securely grip the shank. The 1.25-inch flute length supports a maximum drilling depth of 1.25 inches in a single pass. No coolant-through capability is present, so external coolant or cutting fluid is recommended when drilling production volumes in harder non-ferrous alloys.

Key Features

• Solid carbide construction provides hardness and wear resistance for non-ferrous and soft metallic materials
• No. 35 wire gauge size, 0.1100-inch decimal diameter, 2.80 mm metric equivalent
• 118-degree standard point angle for general-purpose entry and centering
• Bright uncoated finish — no coating buildup to affect tight diameter tolerances
• Diameter tolerance held to -0.0005 to +0.0000 inches for precise hole sizing
• Regular right-hand spiral with 11xD flute-to-diameter ratio for efficient chip clearance
• Two-flute design, straight shank, zero flats — direct chuck or collet mounting

Compatibility

Designed as a general-purpose jobber drill in the TC19 series, compatible with any drill chuck or collet accepting a 0.1100-inch straight cylindrical shank. Suitable for use in drill presses, CNC machining centers, and hand-held power tools configured for small-diameter carbide tooling.

Installation Notes

Installation and use of small-diameter carbide drill bits should be performed by a qualified machinist or tradesperson familiar with carbide tooling. Always secure the shank fully in a matched collet or keyless chuck before operation, and confirm runout is within acceptable limits to prevent bit fracture. Carbide is brittle — avoid side loading, interrupted cuts without proper feed rate adjustment, and impacts during handling or storage. Apply cutting fluid or external coolant when drilling production runs to extend tool life.