Thomas Betts A18-8FL Locking Fork Terminal 600V No. 8 Stud

Product Description

The THOMAS BETTS A18-8FL is a non-insulated locking fork terminal designed for secure crimp connections in electrical wiring applications. Rated at 600 volts, it accepts a No. 8 stud and features a fork width of 0.29 inches and an overall length of 0.75 inches. The contact is made from copper with a tin (TiN) plating for corrosion resistance and reliable conductivity. The red color coding aids in quick identification during installation. Electricians and electrical contractors use this terminal for making permanent, vibration-resistant wire terminations in control panels, junction boxes, and equipment wiring.

This locking fork terminal is suited for residential and commercial electrical installations where a secure, non-insulated crimp termination is required at a No. 8 stud. The locking tab design helps prevent the terminal from backing off the stud during service or under vibration. It is commonly installed in motor control centers, electrical enclosures, and panel wiring where a clean, low-profile connection is needed. Packages contain 100 terminals per unit, making it practical for production wiring and service work alike.

Key Features

• Locking fork design resists backing off the stud under vibration or handling
• 600-volt rating suitable for general electrical wiring applications
• Copper contact with TiN plating for corrosion resistance and consistent conductivity
• Non-insulated construction for compact, low-profile terminations
• Red color coding for quick identification during installation
• Meets UL 486A, UL 486B, UL 94 V-0, CSA 22.2, and RoHS requirements

Compatibility

Designed for use with No. 8 stud sizes in standard crimp-style fork terminal applications. Verify wire gauge range and stud torque specifications against local NEC requirements and the equipment manufacturer's guidelines before installation.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements and applicable local codes. De-energize and lock out the circuit before terminating or replacing any wiring connections. Use a calibrated crimping tool appropriate for non-insulated fork terminals to ensure a proper mechanical and electrical connection. Do not solder over the crimp, as this can introduce brittleness at the wire barrel.