Thhncu-generic thhn2strredmr Thhn 2 Awg Stranded Copper Wire

Product Description

The THHNCU-GENERIC thhn2strredmr is a 2 AWG stranded copper conductor wire with THHN-rated insulation, sold cut to length. Built with 19-strand copper construction, it delivers flexible, high-conductivity performance suitable for general wiring applications in conduit. The PVC insulation is finished with a nylon jacket and rated for 600 volts. Ampacity is 95 amps at 60 degrees C, 115 amps at 75 degrees C, and 130 amps at 90 degrees C. The insulation color is red, which aids in circuit identification and phasing. Licensed electricians and electrical contractors are the primary installers of this wire type.

This wire is used in commercial and residential electrical installations where THHN-rated conductors are required in conduit or cable trays. Common applications include branch circuit wiring, feeder runs, and panel connections. The cut-to-length format makes it practical for job-site pulls where a full reel is not required. The 90 degrees C dry and wet temperature rating supports use in a range of indoor and outdoor conduit environments. The red jacket color is typically used for phase identification in multi-wire installations.

Key Features

• 2 AWG stranded copper conductor with 19-strand configuration for flexibility
• THHN-rated PVC insulation with nylon outer jacket for pull-through performance in conduit
• 600-volt rating suitable for general power distribution wiring
• Ampacity up to 130 amps at 90 degrees C
• 90 degrees C temperature rating, rated for both dry and wet locations
• Red insulation color for phase or circuit identification

Compatibility

Designed for use in standard conduit systems requiring THHN-rated 2 AWG copper conductors at 600 volts or less, consistent with NEC ampacity and installation requirements for this conductor type.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits and verify with a meter before beginning any wiring work. Use appropriate wire-pulling lubricant when pulling through conduit to avoid jacket damage. Verify conduit fill calculations comply with NEC Chapter 9 tables before installation.

Technical Specifications

• Conductor Material: Copper
• Conductor Size: 2 AWG
• Stranding: 19 Strand
• Ampacity: 95 amps at 60 degrees C, 115 amps at 75 degrees C, 130 amps at 90 degrees C
• Voltage Rating: 600 volts
• Temperature Rating: 90 degrees C (Dry/Wet)
• Insulation Material: PVC
• Jacket Material: Nylon
• Insulation Color: Red
• Outer Diameter: 0.381 inches
• Wire Type: THHN
• Weight: 241 pounds per 1000 feet
• Reel Length: 5000 feet

Standard Information

• Brand: THHNCU-GENERIC
• Manufacturer Part Number: thhn2strredmr