Thhncu-generic thhn2strorgmr Thhn 2 Awg Stranded Copper Wire

Product Description

The THHNCU-GENERIC thhn2strorgmr is a 2 AWG stranded copper conductor wire with THHN-rated insulation, sold cut to length. It carries a 600-volt rating and is suitable for use in dry locations with a temperature rating of 90 degrees C. The conductor uses a 19-strand configuration for flexibility during pull-through and termination work. PVC thermoplastic insulation is bonded with a nylon jacket, giving the wire resistance to abrasion, oil, and solvents. Orange insulation color supports color-coded circuit identification. This wire is installed by licensed electricians in residential, commercial, and light industrial applications.

This wire is used in conduit runs for branch circuits, feeder conductors, and general-purpose wiring in panels and distribution systems. The 2 AWG size is commonly used for sub-panel feeds, large appliance circuits, and motor circuits where ampacity demands fall in the 95 to 130 amp range depending on the temperature rating of the termination point. The cut-to-length format reduces waste on job sites where a full spool is not needed.

Key Features

• 2 AWG stranded copper conductor with 19-strand configuration for pull flexibility
• THHN rated for 600 volts in dry locations
• Temperature rated at 90 degrees C dry, with ampacity of 95 amps at 60 degrees C, 115 amps at 75 degrees C, and 130 amps at 90 degrees C
• PVC thermoplastic insulation with nylon outer jacket for abrasion and chemical resistance
• Orange insulation for color-coded circuit identification
• Sold cut to length to minimize job-site waste

Compatibility

Designed for use in conduit systems requiring 2 AWG THHN-rated copper conductors rated at 600 volts for dry indoor installations.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC). De-energize and lock out the circuit before making any connections. Pull wire through conduit using appropriate wire-pulling lubricant to avoid damaging the insulation or jacket. Verify that all termination points and equipment are rated for the conductor temperature and ampacity being applied.

Technical Specifications

• Conductor Material: Copper
• Conductor Size: 2 AWG
• Stranding: 19 Strand
• Insulation Material: PVC Thermoplastic
• Jacket Material: Nylon
• Insulation Color: Orange
• Voltage Rating: 600 Volt
• Temperature Rating: 90 degrees C (Dry)
• Ampacity: 95 amps at 60 degrees C, 115 amps at 75 degrees C, 130 amps at 90 degrees C
• Outer Diameter: 378 mil
• Weight: 234 pounds per 1000 feet

Standard Information

• Brand: THHNCU-GENERIC
• Manufacturer Part Number: thhn2strorgmr